Hinweis nach EU Cookierichtlinie
Diese Seite verwendet Cookies, um den Login und ungelesen Markierungen zu verwalten. Mit dem surfen auf dieser Seite erklärst Du Dich damit einverstanden, dass Cookies gesetzt werden. Mit der Option ganz unten auf der Seite "Cookies von diesem Forum entfernen" kannst Du alle Cookies, die von diesem Forum gesetzt wurden, von Deinem Computer entfernen lassen.

dx port

Jetzt registrieren um mitzureden

Avatar ramstein
männlich GERMANY


Alter: 46
Beiträge: 6311
Dabei seit: 04 / 2005

Private Nachricht ICQ

18.11.2013 - 14:16 Uhr

dx port

DXport is an app that will let multiple people play most games that use the Directplay network code (mostly Microsoft titles) behind a NAT/Router. Some of the games that have been tested are Dungeon Siege, Settlers 3, Age of Empires II, and Motocross Madness 2. Normally you are limited to a single client behind a NAT/Router unless your router supports UPnP. This may also be an option for people that don't like the security issues with UPnP.

DXport allows multiple computers behind a NAT device to connect to Internet games that use the DirectX Netcode.

DXport deals with the fact that you cannot set the client port with games using the DirectX Netcode. The DirectX Netcode will use a port in the range of 2302-2400, most of the time the port picked is 2302. What DXport does is force DirectX to the ports you specify.

When DXport is started you will need to select from the menu or type in the ports you want your DirectX Netcode games to use. The idea is to have all the clients use different ports. You can enter a single port or a range of ports. Since some games require more than one port it will usually be better to specify a range of ports. The ports you enter have to be between 2302 and 2400.

Most people will also have to forward the ports on the NAT device. If you had to forward ports just to play with one machine then this is probably what you will have to do. If you have PC#1 using ports 2302-2311 on then forward ports 2302-2311 to on the NAT device. (To support both DirectX 7 & 8 Netcode you will need to forward both UDP and TCP traffic, DirectX 8 Netcode only uses UDP). You will need to do this for each PC you want to play on behind the NAT device.


PCs Running DXport:
PC#1 - Ports 2302-2311
PC#2 - Ports 2312-2321
PC#3 - Ports 2322-2331

NAT device (Router):
UDP 2302-2311 -> 2302-2311
TCP 2302-2311 -> 2302-2311
UDP 2312-2321 -> 2312-2321
TCP 2312-2321 -> 2312-2321
UDP 2322-2331 -> 2322-2331
TCP 2322-2331 -> 2322-2331

Command Line Options:

DXport.exe -m startport endport
-m Minimize on start, Usefull if you put DXport inyour startup folder.
startport First port in your range.
endport Last port in your range.

Recommended Ranges:

Range 01: 2302 - 2311
Range 02: 2312 - 2321
Range 03: 2322 - 2331
Range 04: 2332 - 2341
Range 05: 2342 - 2351
Range 06: 2352 - 2361
Range 07: 2362 - 2371
Range 08: 2372 - 2381
Range 09: 2382 - 2391
Range 10: 2392 - 2400
Greets from Ramstein

# Anfragen per PM oder EMail werden umgehend gelöscht / Ignoriert.

Registrierte in diesem Topic
Aktuell kein registrierter in diesem Bereich